In the Samsung Galaxy S5 world, root access is one of the most dreaded words that you can mention, especially among app developers it can create many discussions. However, there are in fact many app creators who’d like to stay clear from the Google Play Store, and only let their app be installed on phones or tablet which actually have been rooted.
Now there are a variety of reasons as why this could be good, many of them being the freedom of creating an app which is not controlled or restricted by Google. So that being said, if you’re one of the developers who only wants to let your application run on a rooted Samsung Galaxy S5, then I’ll show you exactly how to do this.
It’s All About Permissions Commands
When someone performs a root on their Samsung Galaxy S5, it will leave a clear footprint which we as developers can utilize, the footprint is very easy and clear to see either. When an Samsung Galaxy S5 has been rooted, they’ll use either SuperUser or SuperSU when accessing applications.
So with this in mind, there are now 2 ways of requesting root access for our apps.
Method 1: We ask for SuperUser permission
Because the Samsung Galaxy S5 root gives so called SuperUser access, we can simply add a permission based command in our source code which would say that only SuperUsers can get to use the app.
When you add that line of code to the source code of your app, only SuperUsers will be granted access to the app, and all other requests will be denied.
Method 2: Execute the SU command
This is pretty similar as to method 1, however, instead of asking for SuperUser access, we ask for SU root privilege. This basically means the same, but targets a broader audience.
You’ll need to add the following code:
Process p = Runtime.getRuntime().exec(“su”);
Keep in mind that with the code above it will only start the root shell which means that within the code’s process, it will get root privilege, after that it stops the process due to not being given any other command. You’ll need to continue working on the code based on how you want the access to be.
Keep in mind that the above 2 codes won’t work for Samsung Galaxy S5 5.0 (lollipop) or higher, as it has been patched by Google already. I’ll work on all lower versions though.
Each Android phones and tablets are sealed at the factory, in order to unseal and become masters of the highest authority, must be hands-root!
When we spent a lot of money to buy an Android phone or tablet manufacturers in a variety of reasons but was “restricted” and “seal”, who want to free “play” device, to have full control over their own money to buy equipment players, should not accept it? Imagine that today you buy a desktop or laptop, but was only original manufacturers restrictions installed Windows systems, but also limit the authority does not have a regular user of the highest authority, not only can not install other operating systems nor the highest authority to perform system management functions in the computer world where you can accept such a state it? Unfortunately, in the world of mobile phones and tablet PCs is where you want to shelter in a controlled environment, but to accept that the manufacturers adjust to a good working environment, a situation like you’re the owner of a mobile phone, but it was hands tied behind by the “Big Brother” manipulation.
If you do not want to be controlled by others, want to feel carefree operate unfettered, so do root for your device is the first step to get rid of restrictions. root is the highest executive authority originally retrieved should belong to the user, and does not change any system settings, just before its manufacturer refused to change the boss attitude, we must do root handle themselves.
Another easy to confuse process and root action is “Brush” Brush refers to the device you reinstall another set of non-original Android operating system, if you feel that the original operating system already meets your needs, then do not need to brush machine, but want to try and experience the other features without changing your phone, just brush it.
Android system storage space is divided into several partitions (Partition), when there is a common / system, / sdcard, / recovery and / cache, etc. Brush / recovery program will be managed in the new system image file (Image) by the SD card copying to / recovery recovery partition, then cover image file to / system partition, reboot after a new system is another.
Before you begin this new experience, or a word of warning: root and Brush is a risk, before taking your own discretion. This paper describes only root program, when you understand the root principles and smooth operation, the brush is the same easy.
Explain Word: What is the root?
The underlying core Android system is the Linux operating system, UNIX and Linux in turn derived. In the UNIX / Linux world, the system administrator account is the root, the root account to regain authority in Android in action will be called the Galaxy S3 root.
We will be more popular in the recent Samsung Galaxy S3 describes how to easily root. Before starting to deal with root ready the following tools:
You must install the Windows Samsung’s USB driver, there are two ways achieved:
Install Samsung Kies, this is the original USB connection management program, drivers will be required after installation, but also more computer management tool: http: //goo.gl/Vc5ho
Install a separate USB driver: http: //goo.gl/DPbT1
Download Galaxy S3 root specific tools downloaded zip file to unlock the two no Chinese, no empty folders in
Set up your phone turn on USB debugging option: [setting] → [Options] → check the developer first USB debugging option 
Start the root:
First phone off, let the phone into Download Mode:
Press the  button + volume down key + [Home] [power] key (press and hold the volume is lower then press the Home and Power), the phone screen will appear warning yellow triangle exclamation point icon.
Press the [Volume] key to continue into Downloading screen, wait for the computer to connect Processing
In the USB cable to the computer and cell phone, when the computer detects the phone, perform Odin 3, Odin port phone No. 3 has occurred 0: [? COM]? Typeface indicates normal detected mobile phone (5 or 6 of class numbers):
[Root] option is set to re-boot by checking  and  to re-set the time, click on [select] PDA files, use the pre-operation in good CF-Root-SGS3-v6.4.zip download files, press [ start] to begin the root process execution
The implementation process will be displayed in the course of [Brush] message box will be displayed at the top after a successful execution [PASS!]. Odin 3 will eventually re-activate the phone
After the phone restarts, we can look at in the end those who were part of the movement:
New apps: Apps → [Apps] by the app to search for a SuperSU program, if any, indicate normal root has been processed. SuperSU highest authority responsible for the management, when an action requires the highest authority, it will pop up a confirmation dialog window, authorized the program in order to obtain the highest authority.
Linux super user commands su is mounted to the / system / xbin data folder
Recovery rescue partition will be replaced ClockWorkMod Recovery, generally referred to as the rescue system provides a more powerful than the built-in features for CWM rescue system, it is recommended when you are after a good root, switch to Recovery Mode, use the Backup and Restore CWM once complete backup of the entire device, and then copy the backup to a computer hard drive inside, you can revert back to the state at the time when the need arises
In addition SuperSU programs, but also increased the CWM Manager App through CWM Manager to manage the operation of CWM recovery partition
Recovery Rescue Mode
Switch the phone to Recovery rescue mode, there are two methods:
After shutdown the power button while pressing the  +  + [volume keys on the Home button for about 2-5 seconds]
With CWM Manager program, do the REBOOT → ClockWorkMod can restart the phone to ClockWorkMod Recovery Mode
Enter ClockWorkMod Recovery screen similar to the bottom of the menu, light bar to move up and down volume keys, power key to the implementation of the project location where the light bar.
Step root Android tablet: the Google Nexus 7 Case
Google Nexus 7 launch that just get a lot of applause, even more powerful quad-core CPU plus the latest version of Android 4.1, its controller fluency stellar. Since there are high-end hardware and software system perfect, if not root to get richer, more diverse applications would be a pity, is even better root tool Nexus 7 features a complete, easy to operate, no root over the people are very easy to use.
Phone 7 and Nexus root principle is the same, only the use of different tools.
Download and install the Nexus Root Toolkit v1.5.4, this tool provides many functions controlled devices, graphical interface greatly simplify the obstacles novice, after familiar with it, root, Recovery and other operations really is simple to die.
Download URL: http: //goo.gl/RVI7y
Nexus Root Toolkit will open after the first asked to select a connected device, first select the Nexus 7 Any Build can. First with “Full Driver Installation Guides” need to install the driver on your computer, it has three steps:
USB cable connecting the computer and the Nexus 7, Nexus 7 to open the USB debugging function ([Setting] →  → Developer options USB debugging check ), then click on the bottom of the [Root Toolkit Launch Device Driver] Opener administrator, find the [Android Phone] → [Android ADB Interface] on the project right-click select [uninstall], will pop up the [ENTER] means uninstall dialog box, select delete the driver software for this device] after pressing [OK], after then disconnect the USB cable to perform Root beneath the Toolkit [Launch USBDeview] the computer individually removed and Nexus 7 related to the USB driver, contains the
Android ADB Interface, ASUS related drivers, Google related drivers Wait
List the three options would Root Toolkit driver option, the system will be shown on the right recommendations, it is recommended that the highest success rate PdaNet Drivers
Then plug it back by a USB cable] [Full Driver Test reopen Nexus 7 and automatically test whether the installation is successful, the first will reopen to BootLoader mode (see step 4), and then re-opening back into the system, the last display Success indicates that the installation is completed
After the driver installation is successful, then do first backup can only use [Backup All App’s], this option reopening Nexus 7 after the start of the backup, and then write the file back to your specified folder. Nexus 7 after reopening, the computer will prompt window, press the [OK] Nexus 7 will be “full backup” screen, press  Back up my data after the backup begins, the final automatically downloaded to a computer. The rest of the newsletter, call logs, contacts, etc. can be backed up
In the home screen Root Toolkit [do] Unlock unlock action, to unlock the Nexus 7 to complete in order for the device to enter BootLoader mode to switch the device to a different state; use the arrow keys to select the following types of volume mode, then press the power button to switch execution:
Start using Android system boot normally use, and enter the main screen
Power off with shutdown
Recovery mode by entering rescue mode
Restart with Restart BootLoader BootLoader
Unlock process will erase data inside the machine, so be sure to step 3 in the manner of application and data backup.
Then there is the highlight of the root. Click Root Toolkit main screen [Root] Nexus 7 will be reset after boot into TWRP (Team Win Recovery Project) rescue pictures, computer pop-up instructions, follow the instructions instructions Nexus TWRP screen 7 that is able to complete the root process. Basically installed in / sdcard /! ReadyToFlash / Rooting_Files folder where busybox.zip and CWM-SuperSU-v0.94.zip
After the root can be found in the app in SuperSU, after executing the event of “SU binary files need to be updated. Continue?” Press [Continue] to update to the latest content.
In the future if the system upgrade the root set and SuperSU the like may be overwritten and lost the highest authority, we can install and execute the OTA RootKeeper related files backed up from the Google Play, the event of root privileges disappear can use OTA RootKeeper to restore the root set .
Direct mounting want to try other non-original system environment, you can also use the ROM Manager Download ROM] [View more of ROM, ROM want to try to pick after. However, before the installation be sure to use
Root Toolkit Backup Lane
[Create Nandroid Backup w / Custom Recovery] Nexus 7 back up the entire hard drive to a computer to facilitate not satisfied after the trial can restore
Excerpts of “cheat secretly reported the first 65” Android highest authority relaxed GET! Smartphone / tablet hands-on teaching ROOT- illustrations do not be afraid, unlock the seal makes the phone more powerful
Performing the LG G3 Kitkat root can be tricky because of its very advanced and complicated system. Due to this, the uninitiated may find this very hard. Inexperienced hackers may also encounter problems that may cause serious problems if the process is done incorrectly. However, the benefits it holds are countless, so for the sake of helping every one out, we are providing here the perfect guide that will help you out throughout the entire LG G3 Kitkat rooting procedure. Everything has been explained in a very basic manner so even beginners can follow.
It is very important that your phone should have at least 80% of energy. This is to ensure that it won’t shut down while you are performing the necessary procedures. Doing so will also help you prevent any errors that could make the process unsuccessful.
Backup Your Files
Although the process leaves out your important files, you should just back up your messages, contacts, pictures, the entire Kitkat update and other significant files in your computer or by using an external memory as a precautionary measure.
You can activate the debugging capability of your device by accessing its Settings followed by Applications and by entering Development where you will find the option.
Disable Antivirus Utilities
Antivirus utilities will prevent the software from rooting LG G3 and from running properly, so it is strongly advised to deactivate them.
Flash Your LG G3
Download the Super Boot file from online sources and extract its contents. Then enter the bootloader status by holding the Power and Volume Down keys altogether. When you reach a new screen, let a few seconds pass before pressing a key. Next, connect your phone to your computer. Open the installer of Super Boot, which you can find in the folder where your downloaded data are located. Easy step-by-step instructions will be provided there so no need to sweat. Unlink your gadget from your computer after the procedures are completed. Congratulations, you just finished modifying your phone. Now, you can customize it freely according to your needs and preferences.
Where To Get The Program?
To help you find the right program to root LG G3 kitkat easily, all you have to do is visit the site that we have that offers the best tool for this job.
Before you begin, please note that there’s no way to recover the data. Although this guide will help you to bring your device back to life, but you’ll still lost all your data. So if your device is not completely bricked or you have a way to back up the unrecoverable data, this is the time to do it. Now let’s quickly initiate the un-bricking process.
Procedure to Un-brick Samsung Galaxy S6 Android Smart Phone:
If somehow, your device is not completely bricked or you have a way to back up the unrecoverable data, do it now. Also ensure that, your device is left with minimum 50% of charge so that it doesn’t get off in the middle of process.
Now most important step- Download the Un-bricking tool for Samsung Galaxy S6. After downloading, check the md5 checksum of downloaded zip file. Once the checksum is confirmed, extract the downloaded zip file on your computer with the help of Win RAR or WinZip.
After extracting the files, pick up your phone and connect your device to the computer with the help of original USB cable. Now on your computer, look for “flash.bat” in the extracted file and run it by double clicking on it. Follow the on screen instructions which are really simple and don’t touch your phone until the flashing process gets over. It will nearly take 5-7 minutes, once the process gets over, you’ll see your Samsung Galaxy S6 back into action.
So there you go guys, that’s simple enough and we hope that you have successfully un-bricked your device. If you’re stroked somewhere in middle of process, we’ll suggest you to run the entire process from very beginning. And, if you still have issues, do let us know through comments.
South Korean brand Samsung has launched galaxy S6 as a upgraded version of the Galaxy S6 and the motive is to dominate the Phablet segment of the market. The galaxy S6 runs on the Android 4.4 jelly bean out of the box platform and is one of the most powerful android smart phones available in the market. Custom OS originates from ROM of a phone and is the full-fledged version of the operating system which includes Kernel which is responsible to function all the features of the phone that are its apps and services and all the things a user needs to run the phone in totality.
One exception to custom OS which arises out if the OS has already been customised by a previous user. Good news came for the android mobile users when it was announced that almost all the features of the brilliant galaxy S6 can be derived to a ROM and can be run without any flaws. It was decided by the XDA people to make a ROM embracing all the features of galaxy S6 and make it compatible to be used in android phones. This decision was taken keeping in view the success and appreciation of the galaxy S6.
Let’s have a look at all new features:
ii. Writing buddy
iii. S6 icons
iv. Smart Scroll
v. Smart Pause
vi. S6 my files
vii. Signature Lock
viii. Multi window
ix. A pen window minus the S pen
x. S6 Sketch Book
xi. One Hand Operation in All Screens
xii. S6 Launcher
xiii. S6 Scrap Book
xiv. S6 Settings with search feature
xv. Popup menu in many S6 apps.
xvi. Quick Glance Air Gesture
xvii. Pen Window Manager from
xviii. Smart Screen options
xix. Possible to use the same app in both multi windows
S6 users will be at the advantage of all the above complimentary features and many more. “Ditto S6” is the name given to the Custom OS which is quite obvious.
Finally, after a month wait, users of Samsung Galaxy S6 can now root their device. Currently, there are two ways to get root access to their smartphone. One is by “Rooting the existing and desired ROM” and the other one is by “Flashing the pre-rooted ROM“.
The first method to root the phone is with Stock Recovery. This method may not give complete access to the root but will have stock recovery. Flash counter can be set to ’0′ and thus, warranty will not get voided. All in all, this method is suitable if you are looking for full stock of device along with rooting.
Download the CG Auto Root package. Extract the package to .tar.
Now, open Odin from the extracted files and tick the ‘PDA’ option.
Now, browse for the file CF-Auto-Root-SGN2.tar under the ‘PDA’ tab.
The next step is to switch off your phone and reboot it, this time in the download mode. Download mode can be can be entered by pressing the keys: Volume (down)+Home+power button. When the warning page comes, press the Volume (up) key.
You are now required to connect your device to the computer via USB. Wait till it is added successfully to the com port. This will be evident through the blue color of the com port.
To flash, press the Start button.
After it is flashed properly, there will be ‘PASS’ written above the table where ID: COM is written. You can safely remove the phone from the computer now.
The process is done successfully. Restart the phone to see superSU application in the phone.
Counter can be reset to ’0′ using the Triangle away.
This method will not only give you the root access to the Samsung Galaxy S6 but also give advanced CWM. Counter can be reset in this process as well but once the device is rebooted, flash counter will increase. This method of rooting suits best for those who want to flash various mod or custom ROM from recovery.
Before starting, kindly ensure that Kies or Samsung USB drivers are installed properly in your system. To get root access to your Galaxy S6 using this process, you need to undertake the following steps:
Download CWM recovery from Chenglu. Extract this downloaded file to cwm-root-n7100.tar.md5.
Open Odin and choose the ‘PDA’ option in it.
Click on the file cwm-root-s6.tar.md5 that was extracted previous.y
The next step is to swtich the device off and restart it in Download mode. To enter download mode, press Volume down+Home+power button. Afterwards, press the Volume up key when the warning page pops up. This will take you to the Download mode.
You now need to connect your Galaxy S6 with the system via USB. Wait till the phone gets added to com port successfully. Look for the light blue color to ensure successful addition to com port.
To flash, press the Start button.
You will notice ‘PASS’ written in the table above the ID: COM once the device is flashed successfully.
Disconnect the device from the system and reboot it. You will now notice superSU app in the application menu.
To get started, you need to download Odinand XXLSJ Firmware package. Extract both the zip files after downloading.
Switch off the device to put it into download mode. To bring you phone into download mode, press the Volume Up key and power button, simultaneously when the phone is switched off.
Connect the device to the system via USB. Open ODIN when you will notice a section named ID : COM. This will turn to yellow when all the required device drivers are installed in the system.
The next step is to lick on “PDA” option to look for the tar file in the extracted folder. Select and click on Start to begin rooting. The phone will automatically reboot once the rooting process is done.
Check whether your device has been rooted or not through the Root checker app.
Once confirmed that the device is rooted, you need to download and install another app, named ROM Manager.
Follow all the directions and instructions carefully to root your device. Missing out on any step may cause damage to your phone.
Rooting and other advanced guides are potentially dangerous if executed in a wrong manner and these guides can brick your phone completely. Sometimes, people bricked their phone by following a wrong or misleading guide, so we’ll suggest you to follow such guides only from reputed sites or reputed forums. Fixing a bricked phone is toughest part and should be done carefully. So if you’ve bricked your Samsung Galaxy S6 then there’s a 90% chances of recovering and bringing it again back to life. Guide we are mentioning here is pretty easy; all you have to do is just follow this article carefully and we’re sure that your Samsung Galaxy S6 will start working again. The tool which we will use throughout this guide is all-in-one tool and it will also install the factory firmware into your device. The tool was developed by a XDA developer ProgMaq and on the basis of positive follow up comments on his XDA post; we believe that this tool will really work for you.
Here this guide will help you root your S6 model number: GTI9100 with the 4.1.2 JellyBean firmware before its official release. The process is easy if followed properly.
Things to Make sure Before Installing:
Make sure that you are rooting S6 with model number: I9100 only as this root will not work on any other device or model number.
The previous firmware in the device should be Jellybean 4.1.2 XXLSJ version. This can be checked by going to Settings, and checking ‘About phone’.
Create a backup of all the data in the phone. Backup your SMS’es using the ‘SMS Backup & Restore app”, which you can download from HERE. Create a backup of all the contacts by syncing them with Gmail application. If you wish to backup call log as well, you can do so using Call Log and Restore app.
When the firmware is installed, there are chances of the apn settings too getting wiped. To backup these settings, go to Applications menu, open Setings,click on Wireless and Network, followed by Mobile Networks, and then Access point names where you can find the settings and note them down.
Ensure that USB debugging is ticked. To check, go to Settings, choose Applications, click on Developments and tick USB Debugging.
Ensure that the phone’s battery is no less than 40%. This will make sure that the phone does not get turned off amidst the installation process.